Re: [eclipse-clp-users] Fwd: How to build tkexdr.so and tkeclipse.so

Sorry for late reply,

 > Change this line in configure:
 >
 >      TCL_REQUIRED="8.5 8.4 8.3"
 >
 > to
 >
 >      TCL_REQUIRED="8.6 8.5 8.4 8.3"
 >
 > and run configure and install ECLiPSe again. ILet us know if this

I had already done that and it didn't work.

After "make -f Makefile.$ECLIPSEARCH",
I got compile error like below:
(I needed to install tcl8.6-dev for building)

gcc -O2 -fomit-frame-pointer  -D_REENTRANT -fPIC -fno-strict-overflow 
-Wno-logical-op-parentheses -Wno-bitwise-op-parentheses 
-Wno-pointer-sign -DD_LOAD -DTHREADED -I. -I../src -I../../sys_include 
-I"/usr/include/tcl8.6" -INONE  -c ../src/tkeclipse.c
../src/tkeclipse.c: In function ‘EcQueueRead’:
../src/tkeclipse.c:456:8: error: ‘Tcl_Interp’ {aka ‘struct Tcl_Interp’} 
has no member named ‘result’
   interp->result = "ec_queue_read: cannot read from ECLiPSe stream";
         ^~
../src/tkeclipse.c: At top level:
cc1: warning: unrecognized command line option ‘-Wno-bitwise-op-parentheses’
cc1: warning: unrecognized command line option ‘-Wno-logical-op-parentheses’
make[1]: *** [Makefile:207: tkeclipse.o] エラー 1
make[1]: ディレクトリ '/usr/local/src/Eclipse_7.0_54/Kernel 
/x86_64_linux' から出ます
make: *** [Makefile.x86_64_linux:46: make_kernel] エラー 2

If you don't mind, I can try to fix this for contribution.
May I do this?

Regards,
Taku Koyahata

On 2021/06/22 4:21, Kish Shen wrote:
>> Tcl8.6 is already in my machine but ./configure need 8.3 ,8.4,or 8.5.
> 
> I suspect that 8.6 will probably work with ECLiPSe. The reason it is
> not in the configure is because we developed the Tcl/Tk interface a
> long time ago, and have not tested it with 8.6, However, unless 8.6
> made some drastic and incompatible changes from previous versions, it
> should work.
> 
> So I suggest that instead of putting 8.5 into ECLiPSETHIRDPARTY, you
> could just modify configure to include 8.6:
> 
> Change this line in configure:
> 
>      TCL_REQUIRED="8.5 8.4 8.3"
> 
> to
> 
>      TCL_REQUIRED="8.6 8.5 8.4 8.3"
> 
> and run configure and install ECLiPSe again. ILet us know if this
> works, and we can either add 8.6 to  configure, pr if you do run into
> problems, we can try to fix them so that ECLiPSe will work with 8.6.
> 
> 
> Cheers,
> 
> Kish
> 
>>
>>
>> Thanks for replying,
>>
>> Tcl8.6 is already in my machine but ./configure need 8.3 ,8.4,or 8.5.
>> Because it seems difficult to downgrade my tcl8.6, I tried the
>> procedures below:
>> 1)make directory named /vol/Eclipse/thirdparty/
>> 2)download
>> https://eclipseclp.org/Distribution/Builds/7.0_54/x86_64_linux/tcltk.tgz
>> into this directory
>> 3)uncompressed it and rename this folder to tcltk8.5
>> 4)do "export ECLIPSTHIRDPARTY=/vol/Eclipse/thirdparty/"
>> 5)./configure can find proper tcltk library
>>
>> I posted whole of my building procedures into my blog
>> http://www2.koyahatataku.com/blog/2021/06/22/debianlinux%e3%81%a7eclipse-clp%e3%82%92%e3%83%93%e3%83%ab%e3%83%89%e3%81%99%e3%82%8b/
>>
>> Regards,
>> Taku Koyahata
>>
>> On 2021/06/17 22:37, Kish Shen wrote:
>>>> Are there any special procedure for building
>>>> "tkeclipse.so" and "tkexdr.so"?
>>>
>>> I suspect the reason tkeclipse was not built is because Tcl/Tk was not
>>> found during configure.
>>> Search the output produce during figure for 'Tcl' - if Tcl/Tk was
>>> found, you should see something like:
>>>
>>> configure: Using Tcl 8.5 in /usr/local
>>>
>>> if configure did not find Tcl/Tk, this can be because you don't have
>>> it installed on your system, or there can be other reasons.
>>>
>>> You can check if you have Tcl/Tk installed by running Tk with the wish
>>> command from your shell:
>>>
>>> bash-3.2$ wish
>>> % echo $tcl_version
>>> 8.5
>>> % exit
>>> bash-3.2$
>>>
>>> if you are able to run Tcl, print the Tcl version as I did above - it
>>> may be your Tcl version is not one that configure looks for.
>>>
>>> Cheers,
>>>
>>> Kish
>>>
>>>
>>> _______________________________________________
>>> ECLiPSe-CLP-Users mailing list
>>> ECLiPSe-CLP-Users_at_lists.sourceforge.net
>>> https://lists.sourceforge.net/lists/listinfo/eclipse-clp-users
>>>
>>
>>
>>
>> _______________________________________________
>> ECLiPSe-CLP-Users mailing list
>> ECLiPSe-CLP-Users_at_lists.sourceforge.net
>> https://lists.sourceforge.net/lists/listinfo/eclipse-clp-users