Hi Kish, Thanks, I am getting further this time: #17 8.457 configure: WARNING: Could not find Gmp (4.2 4.1) in /vol/Eclipse/thirdparty #17 8.457 checking for __gmpz_import in -lgmp... yes #17 8.502 configure: Using OSI clpcbc in /vol/Eclipse/thirdparty/coinclpcbc #17 8.504 configure: Using OSI symclp in /vol/Eclipse/thirdparty/coinsymclp #17 8.506 configure: Will build OSI interfaces for versions clpcbc symclp #17 8.507 configure: Not building CPLEX interface But it stops during the build here: #18 99.81 g++ -shared eplex.o coinplex.o -L/vol/Eclipse/thirdparty/coinsymclp/x86_64_linux/lib -lOsiSym -lSym -lOsiClp -lCgl -lClp -lOsi -lCoinUtils -static-libstdc++ -static-libgcc -L../lib/x86_64_linux -leclipse -L. -lgmp -lpthread -lnsl -ldl -lm -o x86_64_linux/seosisymclp.so #18 99.82 /usr/bin/ld: cannot find -lOsiSym #18 99.82 /usr/bin/ld: cannot find -lSym #18 99.82 /usr/bin/ld: cannot find -lOsiClp #18 99.82 /usr/bin/ld: cannot find -lCgl #18 99.82 /usr/bin/ld: cannot find -lClp #18 99.82 /usr/bin/ld: cannot find -lOsi #18 99.82 /usr/bin/ld: cannot find -lCoinUtils Here’s my complete dockerfile: FROM debian:bullseye AS builder RUN apt update \ && apt install -y \ build-essential \ m4 \ gfortran \ tcl-dev \ tk-dev \ git \ subversion \ wget ENV GMP_VERSION 4.2.4 WORKDIR /gmp RUN wget https://ftp.gnu.org/gnu/gmp/gmp-${GMP_VERSION}.tar.gz \ && tar -xvf gmp-${GMP_VERSION}.tar.gz \ && cd gmp-${GMP_VERSION} \ && ./configure --prefix=/usr --enable-cxx --enable-mpbsd \ && make \ && make install WORKDIR /eclipse RUN git clone https://git.code.sf.net/p/eclipse-clp/git . RUN ./configure --with-osi WORKDIR /eclipse/Eplex RUN make -f Makefile.x86_64_linux install_cbc install_sym RUN ln -s /vol/Eclipse/thirdparty/coinclpcbc2.9 /vol/Eclipse/thirdparty/coinclpcbc RUN ln -s /vol/Eclipse/thirdparty/coinsymclp5.3 /vol/Eclipse/thirdparty/coinsymclp WORKDIR /eclipse RUN ./configure --with-osi RUN make -f Makefile.x86_64_linux install Best, Vasily > On 18 Jul 2021, at 1:29 pm, Kish Shen <kish.shen_at_...6...> wrote: > > Hi Vasily, > > Looking at your log: >> 14 336.0 /bin/cp -pr SYMPHONY/x86_64_linux/include/coin/* /vol/Eclipse/thirdparty/coinsymclp5.3/x86_64_linux/include > > the files are copied to coinstmclp5.3, a version specific (5.3) directory. > > While the configure is looking for symclp in: > >> #16 8.061 configure: WARNING: Could not find x86_64_linux support for symclp in /vol/Eclipse/thirdparty/coinsymclpamd /vol/Eclipse/thirdparty/coinsymclp > symclp, without the version. > > The same applies to clpcbc. I normally create a symbolic link from > clpcbc to clpcbc<version>. It looks like you need to do this yourself, > as the Makefile rule for installing the OSI solvers don't seem to do > this. > >> P.S. Also surprised that configure cannot see GMP. > > this seems to be because configure requires GMP versions 4.1 or 4.2 - > these are very old versions of GMP. I don't know if newer versions of > GMPare not looked for,and I have asked Joachim Schimpf about this. > > You can download the source for GMP 4.1 from: > > https://eclipseclp.org/Distribution/thirdparty/ > > > and build this version of GMP. You should always build ECLiPSe with > GMP since the new compiler was introduced (I think in 6.0), as this > ECLiPSe compiler is not fully unfctional without GMP. > > BTW, you can find some detailed instructions on building ECLiPSe in: > > http://eclipseclp.org/reports/SetupGuide.pdf > > and the .doc version of this is available in the ECLiPSe source, under > documents/internal > > unfortunately, it has not been systematically updated, and parts of it > is very out of date. > > Cheers, > > Kish > > the .doc (i.e. MS word) version of this is available in the ECLiPSe > source, in documents/internal > > On Sat, Jul 17, 2021 at 3:46 AM Vasily Kartashov <info_at_...430...> wrote: >> >> Hi Kish, >> >> I am now getting this: >> >> #14 336.0 /bin/cp -pr SYMPHONY/x86_64_linux/include/coin/* /vol/Eclipse/thirdparty/coinsymclp5.3/x86_64_linux/include >> #14 336.0 /bin/cp -pr SYMPHONY/x86_64_linux/lib/* /vol/Eclipse/thirdparty/coinsymclp5.3/x86_64_linux/lib >> >> … >> >> #16 8.015 checking for __gmpz_import in -lgmp... configure: WARNING: Could not find Gmp (4.2 4.1) in /vol/Eclipse/thirdparty >> #16 8.059 yes >> #16 8.061 configure: WARNING: Could not find x86_64_linux support for clpcbc in /vol/Eclipse/thirdparty/coinclpcbcamd /vol/Eclipse/thirdparty/coinclpcbc >> #16 8.061 configure: WARNING: Could not find x86_64_linux support for symclp in /vol/Eclipse/thirdparty/coinsymclpamd /vol/Eclipse/thirdparty/coinsymclp >> >> >> The dockerfile looks like following: >> >> >> FROM debian:bullseye AS builder >> >> RUN apt update && \ >> apt install -y \ >> build-essential \ >> libgmp-dev \ >> tcl-dev \ >> tk-dev \ >> git \ >> subversion >> >> WORKDIR /eclipse >> RUN git clone https://git.code.sf.net/p/eclipse-clp/git . >> RUN ./configure --with-osi >> >> WORKDIR /eclipse/Eplex >> RUN make -f Makefile.x86_64_linux install_cbc >> RUN make -f Makefile.x86_64_linux install_sym >> >> WORKDIR /eclipse >> RUN ./configure --with-osi >> RUN make -f Makefile.x86_64_linux install >> RUN make -f Makefile.x86_64_linux install_documents >> >> >> >> To trigger the build run the following command from the folder with Dockerfile: >> >> >> docker build --progress=plain -t eclipse:latest . >> >> >> Kind regards, >> Vasily >> >> P.S. Also surprised that configure cannot see GMP. >> >> >>> On 17 Jul 2021, at 12:03 am, Kish Shen <kish.shen_at_...6...> wrote: >>> >>> Hi Vasily, >>> >>> I don't know about Debian Dockerfile, so I don''t know if it requires >>> anythingextra. >>> >>> When configure is run, it will look for COIN-OR related files in the >>> third part directory set ECLIPSETHIRDPARTY environment variable. >>> >>> You probably don't have COIN-OR installed there, but after running >>> configure, you can build and install COIN-OR solvers from the Eplex >>> directory. Go into the Eplex directory, and run this >>> >>> make -f Makefile.<platform> install_cbc >>> (<platform> is your platform, e.g. x86_64_linux) >>> >>> and this should download, build, and install CBC/CLP into the third >>> party directory. >>> >>> You can now run configure again, and it should find CBC/CLP. >>> >>> CBC/CLP is far the best supported COIN-OR solver in eplex, but eplex >>> also support other solvers via the generic OSI interface, and there >>> are Makefile rules to build SYMPHONY as well. Look at the Makefile if >>> you are interested. >>> >>> Cheers, >>> >>> Kish >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> On Fri, Jul 16, 2021 at 12:19 PM Vasily Kartashov <info_at_...430...> wrote: >>>> >>>> Hello, >>>> >>>> Do you have detailed step by step instructions for compiling eclipse + eplex under debian. I am working on a `Dockerfile`, but >>>> >>>> 1) it’s not clear which coinor packages are required >>>> 2) how to make eclipse aware of them >>>> >>>> Currently the Dockerfile looks like this >>>> >>>> FROM debian:bullseye AS builder >>>> >>>> RUN apt update && \ >>>> apt install -y \ >>>> build-essential \ >>>> libgmp-dev \ >>>> tcl-dev \ >>>> tk-dev \ >>>> git \ >>>> coinor-libcbc-dev \ >>>> coinor-libcgl-dev \ >>>> coinor-libclp-dev \ >>>> coinor-libdylp-dev \ >>>> coinor-libvol-dev >>>> >>>> WORKDIR /eclipse >>>> >>>> RUN git clone https://git.code.sf.net/p/eclipse-clp/git . >>>> >>>> RUN ./configure \ >>>> --with-osi \ >>>> --without-cplex \ >>>> --without-xpress \ >>>> --without-gurobi \ >>>> --without-gfd \ >>>> --without-java \ >>>> --without-flexlm \ >>>> --without-graphviz \ >>>> --without-mysql \ >>>> --without-cpviz >>>> RUN make -f Makefile.x86_64_linux install >>>> RUN make -f Makefile.x86_64_linux install_documents >>>> >>>> FROM debian:bullseye-slim >>>> >>>> COPY --from=builder /eclipse/bin/x86_64_linux/eclipse /usr/local/bin/eclipse >>>> COPY --from=builder /eclipse/lib /eclipse/lib >>>> COPY --from=builder /eclipse/lib_public /eclipse/lib_public >>>> >>>> ENTRYPOINT [ "eclipse” ] >>>> >>>> _______________________________________________ >>>> ECLiPSe-CLP-Users mailing list >>>> ECLiPSe-CLP-Users_at_lists.sourceforge.net >>>> https://lists.sourceforge.net/lists/listinfo/eclipse-clp-users >>Received on Sun Jul 18 2021 - 08:53:57 CEST
This archive was generated by hypermail 2.3.0 : Wed Sep 25 2024 - 15:13:21 CEST