Re: [eclipse-clp-users] Question regarding hardware architecture for ECLiPSe

Wit Jakuczun wrote:
> 2008/6/25 Joachim Schimpf (Independent Contractor) <jschimpf_at_...5...>:
>> Wit Jakuczun wrote:
>>> Dear All,
>>>
>>>    I have a question whether the following architecture
>>> is supported by ECLiPSe:
>>>
>>> - Hardvare: 4 x 2-Core UltraSPARC T1, 1.2 GHz
>>> - OS: Solaris 10
>>> - Domain is working on 3 or 4 mainboards f25, each have 4 processors
>>> DualCore and 16GB RAM.
>>>
>>> By supporting I under stand:
>>> - existing binaries (there are binaries for Solaris 5)
>> Don't get confused by Sun's numbering scheme:
>> Solaris X = SunOS 5.X (at least for X >= 7)
>>
>> The existing sparc_sunos5 binaries are 32-bit Sparc binaries
>> and have been compiled on SunOS 5.8, though 5.9 is also known
>> to work.
>>
>> There is a good chance (having some confidence in Sun) that they
>> will work (in 32-bit mode) on your 64-bit SunOS 5.10 machine.
>>
> My contractor made an attempt to run ECLiPSe under SunOS 5.10 (Sparc)
> and got the following error:
> ld.so.1: eclipse.exe: fatal: libgcc_s.so.1: open failed: No such file
> or directory
> 
> It seems that ECLiPSe needs GCC runtime libraries.

I have just investigated the possibility of linking libgcc_s statically,
in order to remove this dependency, but apparently this is not advisable
because (a) the dynamic library is required for proper exception handling
in a C++ context, and (b) the -static-libgcc option works only if using
the gnu linker (which we don't).

So the clean way for you is to get libgcc_s.so.1, e.g. from sunfreeware.com
ftp://ftp.sunfreeware.com/pub/freeware/sparc/10/libgcc-3.4.6-sol10-sparc-local.gz
If you can't/don't want to install it in the standard location, you can
just put libgcc_s.so.1 to <eclipsedir>/lib/sparc_sunos5

I will also see to add this to the standard eclipse distribution.


 > Where can I check what
> GCC version was used to compile ECLiPSe (newest version)?

What's relevant are the libraries it links to.
Go to lib/sparc_sunos5 and use ldd:

% ldd eclipse.exe
         libeclipse.so =>         ./libeclipse.so
         libgmp.so.3 =>   ./libgmp.so.3
         libsocket.so.1 =>        /usr/lib/libsocket.so.1
         libnsl.so.1 =>   /usr/lib/libnsl.so.1
         libdl.so.1 =>    /usr/lib/libdl.so.1
         libm.so.1 =>     /usr/lib/libm.so.1
         libc.so.1 =>     /usr/lib/libc.so.1
         libgcc_s.so.1 =>         /usr/local/lib/libgcc_s.so.1
         libmp.so.2 =>    /usr/lib/libmp.so.2
         /usr/platform/SUNW,UltraAX-i2/lib/libc_psr.so.1
% ldd libeclipse.so
         libgmp.so.3 =>   ./libgmp.so.3
         libsocket.so.1 =>        /usr/lib/libsocket.so.1
         libnsl.so.1 =>   /usr/lib/libnsl.so.1
         libdl.so.1 =>    /usr/lib/libdl.so.1
         libm.so.1 =>     /usr/lib/libm.so.1
         libc.so.1 =>     /usr/lib/libc.so.1
         libgcc_s.so.1 =>         /usr/local/lib/libgcc_s.so.1
         libmp.so.2 =>    /usr/lib/libmp.so.2
         /usr/platform/SUNW,UltraAX-i2/lib/libc_psr.so.1



> What  any other third party libraries except specific
> solvers' libraries (like cplex or xpress-mp) does ECLiPSe need ?

Only libgmp, but that's already part of the distribution.


-- Joachim